Author Topic: Engine cut out and won't start  (Read 858 times)

0 Members and 1 Guest are viewing this topic.

chrislloydie

  • GSXF Owner
  • ***
  • Posts: 22
  • Popularity Vote 1
Engine cut out and won't start
« on: June 04, 2016, 09:05:03 PM »
Looking for some help ASAP.

Today I started up my bike and told my nephew he could rev it gently. Unfortunately he opened the throttle fully and the bike revved high then cut out. The bike will now not restart and the check light is on the dash. When I turn the ignition on, you cannot hear the pump priming etc.

Anyone any ideas?

Thanks.

chrislloydie

  • GSXF Owner
  • ***
  • Posts: 22
  • Popularity Vote 1
Re: Engine cut out and won't start
« Reply #1 on: June 04, 2016, 10:21:49 PM »
Sorted now. He must have knocked the gear lever while sat on it as it wasnt in neutral and it was on side stand.   I put it into neutral and it started as usual.